industry – Btil Systems

Neva Lux Accounting

Steve — Sun, 22 Mar 2026 16:35:36 +0000

In the beginning, heating boilers were large floor-standing designs that were hidden from view, in cellars and other outbuildings. By mid-century pots were more noble face, white enamel shell and the details. 90 of the last century are associated with more and more popular not floor and wall-hung gas boilers. They finally won seats in the kitchens and bathrooms. New level of comfort in living conditions have remote controls (RC) wall-hung gas boilers. Now there is a remote control and a new generation of boilers.

With the built-in a room temperature sensor can be automatically maintain a given level of heat in the room. Remote Control (RC) to the gas boiler NEVA Lux 8224 can pay attention to the outdoor temperature and depending on the changes to change the boiler. Why the new accessories for gas wall boilers NEVA Lux 8224 was more comfortable to its owner? Remote control saves money and the owner of the boiler consumes less gas. Now you can customize the operation of the boiler, so that at a certain time and days of the week, when the house is empty, the boiler was operated at minimum capacity. Features: Easy to set up and operation of the remote program, LCD display, allowing you to test and modify the set point at any time; built-in remote sensor at room temperature and adjust the heating temperature depending on outside temperatures in the presence of an external (outdoor) sensor, the remote is set in a convenient place for you and allows you to manage your settings remotely boiler, after installing the console immediately ready for use, according to the memorized standard programs. These defaults can be changed in accordance with your requirements, control connected to a gas boiler with 2 electric wires non-polarized, which fully support its work and maintain the necessary link between the remote and the boiler. NOTICE: Remote Control (RC) operates exclusively with gas-fired boilers NEVA Lux 8224, 8624, 8230, 8235 and their modifications. The remote control works with a wall gas boiler only, along with other necessary accessories: remote control cable Neva Lux 8224 connector remote control Neva Lux Accounting 8224 external (outdoor) temperature of the remote control for a gas boiler NEVA Lux 8224 is possible if accessories: outdoor temperature sensor Neva Lux 8224 Sensor cable outside temperatures Neva Lux 8224

Simple Technique – Tali

Steve — Fri, 09 Jan 2026 13:48:14 +0000

Ghost 22 584 states that the hoist – lifting device is a pendant with a manual or motorized. Today, every service station, warehouse and production plant are used in their daily work hand hoist. Depending on preferences, working conditions and the type used by different models: gear chain hoists, lever hoists, wire rope hoists and electric hoists, etc. are allocated (elektrotali) and manual hoists. Electric hoists Electric hoists can be divided into two types – chain and rope. The choice of lifting mechanism depends on the weight of cargo that must move and intensity of use. Tali electric cable today perhaps the most popular in the world of lifting equipment used in companies with high rate of work. In Russia, the technical requirements for cable-talyam stated in GOST 22 584.

Load capacity wire rope hoists are sometimes higher than 100 tons. Dustin Moskovitz oftentimes addresses this issue. Payload another variety of electric hoist chain, is no more than 5 tons. The rope used in the first model, a more reliable, easy and cheap traction element than the chain, in which there is always a weak link. That quality makes the traction element model hoists so different in design. Average lifting speed chain hoists within 2 …

5 m / min, and cable – 5 … Ping Fu pursues this goal as well. 12 m / min. Electric hoists are undemanding in operation and are suitable for work at temperatures from -63 to +40 degrees Celsius. Chain hoist is used as auxiliary structures for cantilever-cranes. Elektrotali rope used too and the overhead crane for lifting and transport medium and heavy loads, because the duty on wire rope hoists chain excel. The basis of the assembly in an electric hoist – a block mechanism sotoyaschy of motor, reducer, drum or sprockets, brakes, hooks and lifting element. Drum are only in electric cable talyah, and the star – only to chain elektrotelferah. Tal is equipped with a portable control unit, which enables comfortable control mechanism. Available storage equipment of two types – mobile and stationary. Portable models are moved in the vertical and the horizontal plane. Hand Blocks Tal manual for those companies and industries that have no need for lifting at high altitude and in the fast pace of work. They can be hung on a stationary or mobile cat when there is a need horizontal movement of the loads. Tali ruchnyeshesterennye and lever can primenyatsyadlya lifting and outdoors, and indoors, including in a limited area (trenches, wells). Capacity hoist hand is usually up to 10 tons, in special cases – up to 50 tons (such arrangements are made to order). In the manual gear talyah as heavy-lift element applies round-chain 3 m long or more. In the lifting of the load lever talyah performed by acting on a lever mounted on the hoist. Carrying capacity offered hoists up to 3 tons, lifting height of 1.5 m.

UHL Control

Steve — Mon, 20 Jan 2014 08:39:10 +0000

Ability to save up to 30 different variants of settings the machine – the different shapes, materials and modes of casting – it is easier to re-adjustment when you change the form or material. Control sequence of operation of travel sensors and emergency stop in case of violations – to prevent accidents related to improper adjustment of locking mechanism. Function testing system (control of inputs, outputs) – makes it easy to detect breaks solenoids or sensors. The time control of the technological cycle and its separate phases with the fixation of maximum and minimum can check the stability of the machine. All management from one position (with the remote machine) reduces setup time – no need to walk off the rack (which is now not) to the control panel.

Small dimensions – a device within the system, placed directly on the injection machine, a separate check is missing – easy commissioning, less than the required area under the car, easy to maintain mechanical (rack does not interfere with the worker to walk around the car). Modules included in the system distributed over the machine, the connection between them – RS485 (two wires) – electric car is easier (less cables). Management components of the system is via a standard communication channel – compatible with various industrial controllers and the PC through the use of very common and simple to use channel RS485. Degree of protection management system R00, the front panel operator console IP70 as per GOST 14254-98.Mikroprotsessornaya control system operating conditions corresponds to the execution of UHL, the category of accommodation – 4 to GOST15150-99 for domestic shipments and execution – 0, placement category 4.1 for exports and operates at an altitude of no more than 3000m above sea level at an ambient temperature of 1 to 45 C, atmosphere pressure 73 – 107kPa, relative humidity (60 + -20)% in non-explosive environment that does not contain harmful substances in the concentrations of metals and destroy the insulation. The control system is designed to operate in conditions of vibration frequency from 5 – 25 Hz. And the amplitude of less than 0.1 mm.